Users Guide

% Error: linecard 11 is not present.
Dell#Apr 26 22:26:17: %RPM0-P:CP %IFMGR-1-DEL_PORT: Removed port: Fo 4/0-20,
Apr 26 22:26:17: %RPM0-P:CP %CHMGR-2-LINECARD_DOWN: linecard 5 down - linecard offline
Apr 26 22:26:17: %RPM0-P:CP %IFMGR-1-DEL_PORT: Removed port: Te 5/0-7, Fo 5/8-20,
Apr 26 22:26:17: %RPM0-P:CP %CHMGR-2-LINECARD_DOWN: linecard 10 down - linecard offline
Apr 26 22:26:17: %RPM0-P:CP %IFMGR-1-DEL_PORT: Removed port: Te 10/0-3,
Apr 26 22:26:17: %RPM0-P:CP %CHMGR-2-LINECARD_DOWN: CP unit down - CP unit offline
The following example veries the oine/online status of a switch.
Dell#show chassis brief
Chassis Type : C9010
Chassis Mode : 1.0
Chassis MAC : 34:17:eb:01:d4:00
-- Linecard Info --
LinecardId Type Status ReqTyp CurTyp Version Ports
----------------------------------------------------------------
0 Linecard not present
1 Linecard card problem unknown -
2 Linecard not present
3 Linecard not present
4 Linecard offline C9000LC0640 C9000LC0640 1-0(0-4854) 24
5 Linecard offline C9000LC0640 C9000LC0640 1-0(0-4854) 24
6 Linecard not present
7 Linecard not present
8 Linecard not present
9 Linecard not present
10 Linecard card problem C9000-RPM-2.56T C9000-RPM-2.56T 1-0(0-4854) -
11 Linecard not present
-- Route Processor Modules --
Slot Status NxtBoot Version
----------------------------------------------------------------
0 active online 1-0(0-4854)
1 not present
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm) Power Usage (W)
---------------------------------------------------------------
0 0 absent
0 1 absent
0 2 absent
0 3 up AC up 3440 599.0
Total power: 599.0 W
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed Fan2 Speed Fan3 Speed
---------------------------------------------------------------
0 0 up up 7943 up 7992 up 7975 up 8008
0 1 up up 7975 up 8008 up 7992 up 7975
0 2 up up 7959 up 7959 up 7959 up 7975
Speed in RPM
The following example runs oine diagnostics on a standalone switch
Dell#diag system
Warning - diagnostic execution will cause multiple link flaps on the peer side - advisable to
shut directly connected ports
Proceed with Diags [confirm yes/no]: yes
% Error: Invalid command - card is not present.
% Error: Invalid command - card must be offline.
% Error: Invalid command - card is not present.
% Error: Invalid command - card is not present.
% Error: Invalid command - card is not present.
% Error: Invalid command - card is not present.
310
Debugging and Diagnostics