Users Guide

show file flash://filename
• View a list of les on an external ash.
EXEC Privilege mode
dir usbflash:
• View the running-conguration.
EXEC Privilege mode
show running-config
• View the startup-conguration.
EXEC Privilege mode
show startup-config
Example of the dir Command
The output of the dir command also shows the read/write privileges, size (in bytes), and date of modication for each le.
Dell# dir
Directory of flash:
1 drwx 4096 Jan 01 1980 00:00:00 +00:00 .
2 drwx 2380 Sep 30 2015 16:59:51 +00:00 ..
3 drwx 4096 May 20 2015 10:45:42 +00:00 TRACE_LOG_DIR
4 drwx 4096 May 20 2015 10:45:42 +00:00 CONFD_LOG_DIR
5 drwx 12288 May 20 2015 10:45:42 +00:00 CRASH_LOG_DIR
6 drwx 28672 May 20 2015 10:45:42 +00:00 CORE_DUMP_DIR
7 drwx 4096 May 20 2015 10:45:42 +00:00 DEFAULT_DIAG_REPORT_DIR
8 d--- 4096 May 20 2015 10:45:44 +00:00 ADMIN_DIR
9 drwx 4096 May 20 2015 10:45:44 +00:00 RUNTIME_PATCH_DIR
10 -rwx 23495 May 21 2015 10:53:00 +00:00 0521_6unit.cfg
11 -rwx 25350 May 20 2015 16:22:44 +00:00 0520_6unit.cfg
12 -rwx 33901 Jul 29 2015 01:48:08 +00:00 backup1
13 -rwx 32267 Aug 07 2015 14:45:26 +00:00 startup-config.bak
Changes in Conguration Files
Conguration les have three commented lines at the beginning of the le, as shown in the following example, to help you track the last
time any user made a change to the le, which user made the changes, and when the le was last saved to the startup-conguration.
In the running-conguration le, if there is a dierence between the timestamp on the “Last conguration change,” and “Startup-cong
last updated,” you have made changes that have not been saved and will not be preserved after a system reboot.
Example of the show running-config Command
Dell#show running-config
Current Configuration ...
! Version 1-0(0-4013)
! Last configuration change at Wed Jun 3 16:24:25 2015 by admin
!
boot system rpm0 primary system: A:
boot system rpm0 secondary tftp://10.16.127.35/DT-MAA-C9000-3
boot system rpm0 default system: A:
boot system rpm1 primary system: A:
boot system rpm1 secondary tftp://10.16.127.35/DT-MAA-C9000-3
boot system rpm1 default system: A:
boot system gateway 10.16.127.148
!
service timestamps log datetime
!
logging coredump
!
hostname Dell
!
56
Getting Started