Users Guide

MIB Object OID Object Values Description
copyDestFileLocation and
copyDestFileName.
copyDestFileLocation .1.3.6.1.4.1.6027.3.5.1.1.1.1.6
1 = ash
2 = slot0
3 = tftp
4 = ftp
5 = scp
Species the location of
destination le.
• If copyDestFileLocation is
FTP or SCP, you must
specify copyServerAddress,
copyUserName, and
copyUserPassword.
copyDestFileName .1.3.6.1.4.1.6027.3.5.1.1.1.1.7 Path (if the le is not in the
default directory) and lename.
Species the name of
destination le.
copyServerAddress .1.3.6.1.4.1.6027.3.5.1.1.1.1.8 IP Address of the server. The IP address of the server.
• If you specify
copyServerAddress, you
must also specify
copyUserName and
copyUserPassword.
copyUserName .1.3.6.1.4.1.6027.3.5.1.1.1.1.9 Username for the server. Username for the FTP, TFTP, or
SCP server.
• If you specify
copyUserName, you must
also specify
copyUserPassword.
copyUserPassword .1.3.6.1.4.1.6027.3.5.1.1.1.1.10 Password for the server. Password for the FTP, TFTP, or
SCP server.
Copying a Conguration File
To copy a conguration le, use the following commands.
NOTE
: In UNIX, enter the snmpset command for help using the following commands. Place the f10-copy-cong.mib le in the
directory from which you are executing the snmpset command or in the snmpset tool path.
1 Create an SNMP community string with read/write privileges.
CONFIGURATION mode
snmp-server community community-name rw
2 Copy the f10-copy-cong.mib MIB from the Dell iSupport web page to the server to which you are copying the conguration le.
3 On the server, use the snmpset command as shown in the following example.
snmpset -v snmp-version -c community-name -m mib_path/f10-copy-config.mib force10system-ip-
address mib-object.index {i | a | s} object-value...
• Every specied object must have an object value and must precede with the keyword i. Refer to the previous table.
• index must be unique to all previously executed snmpset commands. If an index value has been used previously, a message like
the following appears. In this case, increment the index value and enter the command again.
Error in packet.
Reason: notWritable (that object does not support modification)
Failed object: FTOS-COPY-CONFIG-MIB::copySrcFileType.101
970
Simple Network Management Protocol (SNMP)