Administrator Guide
• Hop — a hop number(counted negatively to indicate reverse-path)
• OIF IP — outgoing interface address
• Proto — multicast routing protocol
• Forwarding code — error code as present in the response blocks
• Source Network/Mask — source mask
ip mroute
Assign a static mroute.
C9000 Series
Syntax
ip mroute destination mask {ip-address | null 0| {{bgp| ospf} process-id | isis
| rip | static} {ip-address | tag | null 0}} [distance]
To delete a specific static mroute, use the no ip mroute destination mask {ip-address | null
0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}}
[distance] command.
To delete all mroutes matching a certain mroute, use the no ip mroute destination mask command.
Parameters
destination
Enter the IP address in dotted decimal format of the destination device.
mask
Enter the mask in slash prefix formation ( /x ) or in dotted decimal format.
null 0 (OPTIONAL) Enter the keyword null then zero (0).
[
protocol
[
process-id
|
tag
]
ip-address
]
(OPTIONAL) Enter one of the routing protocols:
• Enter the BGP as-number then the IP address in dotted decimal format of the reverse
path forwarding (RPF) neighbor. The range is from 1 to 65535.
• Enter the OSPF process identification number then the IP address in dotted decimal
format of the RPF neighbor. the range is from 1 to 65535.
• Enter the IS-IS alphanumeric tag string then the IP address in dotted decimal format
of the RPF neighbor.
• Enter the RIP IP address in dotted decimal format of the RPF neighbor.
static
ip-address
(OPTIONAL) Enter the Static IP address in dotted decimal format of the RPF neighbor.
ip-address
(OPTIONAL) Enter the IP address in dotted decimal format of the RPF neighbor.
distance
(OPTIONAL) Enter a number as the distance metric assigned to the mroute. The range is
from 0 to 255.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
E-Series legacy
command
Related
Commands
show ip mroute — displays the routing table.
Multicast 1033