Administrator Guide

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(3.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld query-interval
Change the transmission frequency of the MLD host.
Syntax
ipv6 mld query-interval [seconds]
To return to the default interval, use the no ipv6 mld query-interval command.
Parameters
seconds Enter the interval in seconds. The range is from 1 to 18000.
Defaults 60 seconds.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(3.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld query-max-resp-time
Set the maximum query response time advertised in the general queries.
Syntax
ipv6 mld query-max-resp-time {seconds}
To return to the default, use the no ipv6 mld query-max-resp-time command.
Parameters
seconds Enter the interval in seconds. The range is from 1 to 25.
Defaults 10 seconds.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.11(3.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S6000–ON, S6010–ON,
S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld version
Configure the MLD version on the system.
Syntax
ipv6 mld version {1 | 2}
Defaults MLD version 2
Command Modes INTERFACE
1044 Multicast Listener Discovery Protocol