Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1091

track interface line-protocol

Configure object tracking on the line-protocol state of a Layer 2 interface.

C9000 Series

Syntax

track object-id interface interface line-protocol

To return to the default setting, use the no track object-id command.

Parameters

object-id

Enter the ID number of the tracked object. The range is 1 to 500.

interface

Enter one of the following values:

• For a 1-Gigabit Ethernet interface, enter gigabitethernet and the slot-number/

port-number.

• For a Loopback interface, enter the keyword loopback then a number from 0 to

16383.

•

For a port channel interface, enter the keywords port-channel then a number.

• For a 10-Gigabit Ethernet interface, enter tengigabitethernet and the slot-

number/ port-number.

• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Defaults none

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

8.3.12.0 Introduced on the S4810.

8.4.1.0 Introduced.

Usage Information

Use this command to create an object that tracks the line-protocol state of a Layer 2 interface by monitoring its

operational status (UP or DOWN).

When the link-level status goes down, the tracked object status is considered to be DOWN; if the link-level status

is up, the tracked object status is considered to be UP.

Commands

• show track – displays information about tracked objects, including configuration, current state, and clients

which track the object.

• track interface ip routing – configures object tracking on the routing status of an IPv4 Layer 3 interface.

track ip route metric threshold

Configure object tracking on the threshold of an IPv4 route metric.