Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1111

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added support for the Multi-Process OSPF.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.1 Introduced on the E-Series.

Usage Information To specify a distance for routes learned from other routing domains, use the redistribute command.

distribute-list in

Apply a filter to incoming routing updates from OSPF to the routing table.

C9000 Series

Syntax

distribute-list prefix-list-name in [interface]

To delete a filter, use the no distribute-list prefix-list-name in [interface] command.

Parameters

prefix-list-name

Enter the name of a configured prefix list.

interface

(OPTIONAL) Enter one of the following keywords and slot/port or number information:

• For Port Channel groups, enter the keywords port-channel then a number. The

range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

•

For a VLAN, enter the keyword vlan then a number from 1 to 4094.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/

port information.

Defaults Not configured.

Command Modes ROUTER OSPF

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.