Administrator Guide
reset
Reset or reboot the linecard, RPM, PE and PE stack-unit.
C9000 Series
Syntax
reset {linecard slot-id | rpm slot id [hard] | pe pe-id [stack-unit unit-
number]}
From a PE console, use reset stack-unit unit-number [hard] to reset the stack-unit.
Parameters
linecard
slot-id
Enter the keyword linecard and the slot-id number to specify the set of line-card ports
for reset. The slot ID range is from 0 to 11.
rpm Enter the keyword rpm and the slot-id number to specify the route processor module
(RPM) ports for reset. The range for the RPM card ports is from 0 to 1.
hard (Optional) Reboot (power cycle) the specified line card, RPM card, or PE stack-unit (The
hard option for PE is only available from PE console).
pe
pe-id
Enter the keyword pe and the port extender (PE) ID. The range for pe-id is from 0 to
255.
stack-unit
unit-
number
(Optional) Enter the keyword stack-unit and the stack-unit number. The range is
from 0 to 7.
Defaults none
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Added the hard reset option.
7.8.1.0 Augmented to run on the standby unit in order to reset the standby unit directly.
7.7.1.0 Introduced on the S-Series.
Usage Information
Resetting is a soft reboot, including flushing the forwarding tables. The hard option is available for PE stack-unit
from the PE console only.
To reset (soft reboot) a stack-unit from PE console, use the reset command and specify the stack-unit number.
To perform a hard reset or power-cycle to a specified stack-unit, use the
reset stack-unit unit-number
hard command.
Example: linecard
Dell#reset linecard 0
Dell#Jun 24 15:26:39: %RPM1-P:CP %CHMGR-5-LINECARD_RESET: linecard 0 being
reset
Jun 24 15:26:39: %RPM1-P:CP %CHMGR-2-LINECARD_DOWN: linecard 0 down - reset
Jun 24 15:26:39: %RPM1-P:CP %IFMGR-1-DEL_PORT: Removed port: Fo 0/0-20,
Dell#Jun 24 15:28:24: %RPM1-P:CP %CHMGR-5-CHECKIN: Checkin from linecard 0
(type C9000LC0640, 24 ports)
1216 PE Stacking