Administrator Guide

rpm 1 (CP) Power on Reset N/A
rpm 1 (RP) Power on Reset N/A
linecard 0 N/A N/A
linecard 1 N/A N/A
linecard 2 N/A N/A
linecard 3 N/A N/A
linecard 4 Warm Reset N/A
linecard 5 N/A N/A
linecard 6 N/A N/A
linecard 7 N/A N/A
linecard 8 N/A N/A
linecard 9 N/A N/A
linecard 10 Power on Reset N/A
linecard 11 Power on Reset N/A
DellEMC#show reset-reason pe all
Last Reset Reason:
---------------------
Type Cause Time
-----------------------------------------------------------------------------------
PE ID: 10
==========
stack-unit 0 N/A N/A
stack-unit 1 N/A N/A
stack-unit 2 N/A N/A
stack-unit 3 Reboot by Software 11/02/2017-08:15
stack-unit 4 N/A N/A
stack-unit 5 N/A N/A
stack-unit 6 N/A N/A
stack-unit 7 N/A N/A
PE ID: 20
==========
stack-unit 0 N/A N/A
stack-unit 1 Reboot by Software 11/02/2017-04:10
stack-unit 2 N/A N/A
stack-unit 3 N/A N/A
stack-unit 4 N/A N/A
stack-unit 5 N/A N/A
stack-unit 6 N/A N/A
stack-unit 7 N/A N/A
show rpm
View the current status of the RPM.
C9000 Series
Syntax
show rpm [slot-id [brief] | all]
Parameters
slot-id (OPTIONAL) Enter the RPM slot-ID zero (0) or 1.
all (OPTIONAL) Enter the keyword all to view a table with information on all present
RPMs.
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of RPM information.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Control and Monitoring 131