Administrator Guide

!
feature extended-bridge
!
pe provision 10
cascade interface TenGigabitEthernet 0/2
cascade interface TenGigabitEthernet 0/2 peer
!
pe provision 11
cascade interface TenGigabitEthernet 0/5
cascade interface TenGigabitEthernet 0/5 peer
!
interface peGigE 255/0/1
shutdown
!
--More--
show config
Display the configuration in the batch mode.
C9000 Series
Syntax
show config [common | user | local]
Parameters
common Displays the common configuration in the batch mode.
user Displays the configuration done in the batch mode in an order entered by the user.
local Displays the local configuration in the batch mode.
Command Modes CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced on the C9010.
Example
Dell(conf-b)#show config
interface vlan 10
interface vlan 20
no shutdown
interface vlan 30
interface vlan 40
ip access-list standard stdacl1
Dell(conf-b)#
Dell(conf-b)#show config user
interface vlan 10
exit
interface vlan 20
no shutdown
exit
interface vlan 30
exit
interface vlan 40
exit
ip access-list standard stdacl1
exit
Port Extenders (PE) 1311