Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1321

advertise med power-via-mdi

Configure the system to advertise IEEE 802.1ab extended power-via— MDI TLV.

C9000 Series

Syntax

[no] advertise med power-via-mdi

To return to the default, use the no advertise med power-via-mdi command.

Parameters

power-via-mdi Enter the keyword power—via-mdi to advertise IEEE 802.1ab MED Extended power-

via-mdi TLV.

Defaults Disabled

Command Modes

• LLDP CONFIGURATION (conf-lldp)

• INTERFACE LLDP CONFIGURATION (conf-if-interface-lldp)

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

Usage Information

Advertise extended power via MDI TLVs to all ports that are connected to the 802.1ab powered endpoint devices.

When the advertise med power-via-mdi command is enabled in CONFIGURATION mode, advertisement

is enabled for all the interfaces in a system. To enable advertisement for a specific interface, configure the

command in INTERFACE configuration mode.

Port extender (PE) processes and advertises LLDP power-via-MDI TLVs when the LLDP advertisement of the

TLV is enabled on the PE in class power management mode. Incoming LLDP messages are processed only when

the PE is in class power management mode.

on-disable

Enable transmission of LLDP shutdown frames.

C9000 Series

Syntax

on-disable transmit {shutdown}

Parameters

transmit Enter the keyword transmit to transmits the LLDP frames.

shutdown Enter the keyword shutdown to shut down the LLDP frames.

Defaults None.

Command Modes CONFIGURATION INTERFACE (conf-if-interface-lldp)