Administrator Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
snmp-server context
Configure a new context string for SNMP (SNMPv3) server.
C9000 Series
Syntax
snmp-server context {line}
To remove a user from the SNMP group, use the no snmp-server context {line} command.
Parameters
line Enter the context string (max 32 characters), on the host that connects to the agent.
Defaults NONE.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0)
Introduced on the C9010.
Usage Information
Example
Dell(conf)#snmp-server context line
Related
Commands
show snmp user — displays the information configured on each SNMP user name.
snmp-server community
Configure a new community string access for SNMPv1 v2 and v3.
C9000 Series
Syntax
snmp-server community community-name {ro | rw} [ipv6 ipv6-access-list-name
[ipv6 ipv6-access-list-name | access-list-name | security-name name] |
security-name name [ipv6 ipv6-access-list-name | access-list-name | security-
name name] | access-list-name [ipv6 ipv6-access-list-name | access-list-name |
security-name name]]]
To remove access to a community, use the no snmp-server community community-string {ro |
rw} [security-name name [access-list-name | ipv6 access-list-name | access-
list-name ipv6 access-list-name]] command.
Parameters
community-name Enter a text string (up to 20 characters long) to act as a password for SNMP.
ro Enter the keyword ro to specify read-only permission.
1552 Simple Network Management Protocol (SNMP) and Syslog