Administrator Guide

Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Related
Commands
email-address — configure email addresses to reach the contact person.
phone — configure phone numbers to reach the contact person.
time-zone
Configure the time zone for contacting the person.
Syntax
time-zone zone +-HH:MM[start-time HH:MM] [end-time HH:MM]
To remove the time zone, use the no time-zone [zone | start-time | end-time] command.
Parameters
zone
+-HH:MM
Enter the keyword zone then a time difference from GMT expressed as HH:MM. This
number may be preceded by either a + or – sign.
start-time
HH:MM
Enter the keywords start-time then a starting time expressed as HH:MM. Use the
24-hour clock format.
stop-time
HH:MM
Enter the keywords stop-time then a stopping time expressed as HH:MM. Use the 24-
hour clock format.
Command Modes SUPPORTASSIST PERSON
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version Description
9.11(0.0) Introduced on the M I/O Aggregator and FN IOM.
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Usage Information This command is optional for SupportAssist service configuration.
SupportAssist Server Commands
Dell Networking OS supports the following SupportAssist Server mode commands.
proxy-ip-address
Configure a proxy for reaching the SupportAssist remote server.
Syntax
proxy-ip-address {ipv4-address | ipv6-address} port port-number [ username
userid password [encryption-type] password ]
To remove the proxy, use the no proxy-ip-address command.
Parameters
ipv4-address Enter the IP address of the proxy server in a dotted decimal format (A.B.C.D).
ipv6-address Enter the IPv6 address of the proxy server in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
SupportAssist 1627