Administrator Guide

show boot system
Display information about boot images currently stored on the system.
C9000 Series
Syntax
show boot system all
From a PE console, use the following:
show boot system {stack-unit unit number | all}
Parameters
all Display the boot images stored on the system for the Control Processor, Route
Processor, and line card CPUs.
From a PE console, display boot image information on all the unit.
stack-unit unit-
number
Display the boot image information for a specified stack-unit. The stack-unit number
range is from 0 to 7.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
Example
Dell#show boot system all
Current system image information in the system:
===============================================
Type Boot Type A B
------------------------------------------------------
rpm 0 (CP) DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
rpm 1 (CP) DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
rpm 0 (RP) DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
rpm 1 (RP) DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
linecard 0 DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
linecard 1 is not present.
linecard 2 DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
linecard 3 is not present.
linecard 4 is not present.
linecard 5 DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
linecard 6 DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
linecard 7 is not present.
linecard 8 is not present.
inecard 9 is not present.
linecard 10 DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
linecard 11 DOWNLOAD BOOT 1-0(0-4074) 1-0(0-4081)
Example (PE
Console)
Dell#show boot system stack-unit all
Current system image information in the system:
===============================================
174 File Management