Administrator Guide

uplink-state-
group
for the uplink state group configuration
users
for the current users configuration
vlt
for the current VLT configuration
vrf
for the current VRF configuration
vxlan
for the current Vxlan instances configuration
wred-profile
for the current wred-profile configuration
configured (OPTIONAL) Enter the keyword configuration to display line card interfaces with
non-default configurations only.
status (OPTIONAL) Enter the keyword status to display the checksum for the running
configuration and the start-up configuration.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information The status option allows you to display the size and checksum of the running configuration and the startup
configuration.
Example
Dell#show running-config
Current Configuration ...
! Version 9.2(1.0B2)
! Last configuration change at Thu Mar 6 02:10:35 2014 by default
!
boot system primary system: A:
boot system secondary system: A:
boot system default system: A:
boot system gateway 1.1.1.1
!...
Example
Dell#show running-config status
running-config checksum 0xB4B9BF03
startup-config checksum 0x8803620F
Dell#
184 File Management