Administrator Guide

Usage Information
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X configuration details (Port
Authentication status, Untagged VLAN ID, Authentication PAE state, and Backend state) are displayed for each
supplicant, as shown in the following example.
Example
Dell#show dot1x int tengig 2/32
802.1x information on Te 2/32:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
Port Auth Status: UNAUTHORIZED
Re-Authentication: Disable
Untagged VLAN id: None
Guest VLAN: Enable
Guest VLAN id: 10
Auth-Fail VLAN: Enable
Auth-Fail VLAN id: 11
Auth-Fail Max-Attempts: 3
Tx Period: 30 seconds
Quiet Period: 60 seconds
ReAuth Max: 2
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 3600 seconds
Max-EAP-Req: 2
Auth Type: SINGLE_HOST
Auth PAE State: Initialize
Backend State: Initialize
Dell#
Example (mac-
address)
Dell#show dot1x interface tengig 2/21 mac-address 00:00:01:00:07:00
802.1x information on Te 2/21:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
Re-Authentication: Disable
Guest VLAN: Disable
Guest VLAN id: NONE
Auth-Fail VLAN: Disable
Auth-Fail VLAN id: NONE
Auth-Fail Max-Attempts: NONE
Mac-Auth-Bypass: Enable
Mac-Auth-Bypass Only: Disable
Tx Period: 5 seconds
Quiet Period: 60 seconds
ReAuth Max: 1
Supplicant Timeout: 30 seconds
Server Timeout: 30 seconds
Re-Auth Interval: 60 seconds
Max-EAP-Req: 2
Host Mode: MULTI_AUTH
Max-Supplicants: 128
Port status and State info for Supplicant: 00:00:01:00:07:00
Port Auth Status: AUTHORIZED(MAC-AUTH-BYPASS)
Untagged VLAN id: 4094
Auth PAE State: Authenticated
Backend State: Idle
Dell#
Example
(Interface)
Dell#show dot1x interface tengig 0/21
802.1x information on Te 0/21:
-----------------------------
Dot1x Status: Enable
Port Control: AUTO
802.1X 209