Administrator Guide

Q6 1200 3000
Q7 800 1000
Q8 600 1000
Q9 600 1000
Q10 3200 1000
Q11 2600 6000
Q12 2300 3000
Q13 1800 3000
Q14 1 4000
Q15 1 100
Q16 1200 100
Q17 1200 1000
Q18 7000 1000
Q19 800 7000
Q20 5000 1000
Dell#show cpu-queue rate queue-id 8
Service-Queue Rate (kbps) Burst (kb)
-------------- ----------- ----------
Q8 600 1000
Dell#show cpu-queue rate range 8 12
Service-Queue Rate (kbps) Burst (kb)
-------------- ----------- ----------
Q8 600 1000
Q9 600 1000
Q10 3200 1000
Q11 2600 6000
Q12 2300 3000
show ip protocol-queue-mapping
Display the CPU queue mapping for IPv4 protocols.
C9000 Series
Syntax
show ip protocol-queue-mapping queue-id
Defaults Not configured.
Command Modes EXEC Privilege
Usage Information
The show output displays information on CPU traffic flows for IPv4 protocols, including the ingress queue at
which the traffic is queued and the CPU to which protocol traffic is sent with the applied rate limits (configured or
default) in kilobits per second (kbps). The egress port queues on CPUs are abbreviated as: RP (Route Processor),
CP (Control Processor), and LC (line card).
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell#show ip protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort Rate (kbps)
498 Control Plane Policing (CoPP)