Administrator Guide

show mac protocol-queue-mapping
Display the CPU queue mapping for MAC protocols.
C9000 Series
Syntax
show mac protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell#show mac protocol-queue-mapping
Protocol Destination Mac EtherType Queue EgPort
Rate (kbps)
-------- --------------- --------- ----- ------
-----------
ARP any 0x0806 Q1/Q8/Q2/Q9 CP/RP
100
FRRP 01:01:e8:00:00:10/11 any Q19 LP
300
LACP 01:80:c2:00:00:02 0x8809 Q13 RP
500
LLDP any 0x88cc Q6 CP
500
GVRP 01:80:c2:00:00:21 any Q12 RP
200
STP 01:80:c2:00:00:00 any Q13 RP
150
ISIS 01:80:c2:00:00:14/15 any Q13 RP
500
09:00:2b:00:00:04/05 any Q13 RP
500
show protocol-queue-mapping
Display the protocol-queue mapping for each configured protocol.
C9000 Series
Syntax
show protocol-queue-mapping [queue-id queue-number]
Parameters
queue-id queue-
number
(Optional) Display the protocol-queue mapping for a specified control-plane queue. The
range of CPU queue numbers is from 0 to 20.
Defaults Not configured.
Command Modes EXEC Privilege
500 Control Plane Policing (CoPP)