Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

561

562

563

564

565

566

567

568

569

570

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.0 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

Commands

show hardware — displays the data plane or management plane input and output statistics of the designated

component of the designated stack member.

clear hardware system-flow

Clear system-flow statistics from a specified line card.

C9000 Series

Syntax

clear hardware system-flow {cp-switch | linecard slot-id | pe pe-id stack-unit

unit-number} [port-set port-pipe counters]

Parameters

linecard

slot-id

Enter the linecard slot-id parameters to identify the line card on which you want

to clear system-flow statistics. The range of slot IDs is from 0 to 11.

pe-id

Enter the pe pe-id parameters to specify the port extender ID for which you want to

clear system-flow statistics.

NOTE: The pe option is only visible when the extended bridge feature is

enabled.

stack-unit

unit-

number

Enter the stack—unit unit—number parameters to specify the stack-unit for which

you want to clear system-flow statistics.

port-set

port-pipe

counters

Enter the keywords port-set along with a port-pipe number, then the keyword

counters to clear the system-flow counters on the selected port-pipe. The range of port-

pipe numbers is: 0 to 2 on line card 0 and 0 to 3 on line cards 1 and 2.