Administrator Guide

Version Description
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
pool
Create an address pool.
C9000 Series
Syntax
pool name
Parameters
name Enter the address pool’s identifying name.
Defaults none
Command Modes DHCP
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
show ip dhcp client statistics
Display statistical information about DHCP client interfaces.
C9000 Series
Syntax
show ip dhcp client statistics [interface type slot/port]
Parameters
interface
typeslot/port
Enter the keyword interface with the interface type and slot/port information to
display DHCP client information for a specified interface. The valid interface types are:
• For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
Defaults none
Command Modes EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
606 Dynamic Host Configuration Protocol (DHCP)