Administrator Guide

• For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE
then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-numberrange is from 0 to 7; and the port-id range is 25 to 28 or 49
to 52 depending on the PE.
NOTE: The peGigE or peTenGigE interface option is only visible when the
feature extended bridge is enabled.
linecard slot-id Enter the linecard slot-id parameters to specify the switch ports on a line card.
The range of slot IDs is from 0 to 11.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13.0.1P1 Introduced peTenGigE interface support on the C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.2.1.0 Added support for 4093 VLANs on E-Series ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Support added for hybrid port/native VLAN, introduced on the S Series.
7.5.1.0 Introduced on the C-Series.
Usage Information
To view the switchport information for multiple ports of a specified slot, you can specify any random port number
or a range of ports, or a combination of both.
To specify a port range, you can enter a hyphenated range of one or more port range values separated with
commas; for example,
show interfaces tengigabitethernet 10/0-1 switchport
NOTE: The multiple port range value is supported only for the Gigabit Ethernet, 10-Gigabit
Ethernet, 40-Gigabit Ethernet, Fast Ethernet, FC, Port Channel, and VLAN interfaces.
The following describes the show interfaces switchport command for the following example.
Items Description
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid (“Hybrid”),
which supports both untagged and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member.
Example
Dell#show interfaces switchport
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk
i - Internal untagged, I - Internal tagged, v - VLT untagged, V -
VLT tagged
738 Interfaces