Administrator Guide

Source port : 23
Destination address : a::2
Destination mask : /128
Destination port : 0
source-interface name :
source-interface num :
Match sequence Num : 2
Protocol type : tcp
IP or IPv6 : IPv6
Source address : a::1
Source mask : /128
Source port : 0
Destination address : a::2
Destination mask : /128
Destination port : 21
source-interface name :
source-interface num :
Match sequence Num : 3
Protocol type : tcp
IP or IPv6 : IPv6
Source address : a::1
Source mask : /128
Source port : 21
Destination address : a::2
Destination mask : /128
Destination port : 0
source-interface name :
source-interface num :
Dell#
transform-set
Specify the transform set for crypto policy use.
C9000 Series
Syntax
transform-set transform-set-name
To delete a transform set from the crypto policy, use the no transform-set transform-set-name
command.
Parameters
transform-set-
name
Enter the name for the crypto policy transform set.
Defaults none
Command Modes CONFIG-CRYPTO-POLICY
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Descrption
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Introduced on the Z9000, S4810, and S4820T.
862 Internet Protocol Security (IPSec)