Administrator Guide

show ip route
View information, including how they were learned, about the IP routes on the switch.
C9000 Series
Syntax
show ip route hostname | ip-address [mask] [longer-prefixes] | list prefix-list
| protocol [process-id | routing-tag] | all | connected | static | summary]
[vrf vrf-name]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the VRF name to list the routes in the
route table of a specific VRF.
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view more
detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the IP
address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a configured prefix list. For more
information, refer to the show ip route list command.
protocol (OPTIONAL) Enter the name of a routing protocol (bgp, isis, ospf, rip) or the
keywords connected or static.
NOTE: bgp, isis, ospf, and rip.
• If you enter bgp, you can include the BGP as-number .
•
If you enter isis, you can include the ISIS routing-tag.
• If you enter ospf, you can include the OSPF process-id.
process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be displayed.
routing-tag (OPTIONAL) Specify that only ISIS routes with a certain routing tag must be displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected routes.
all (OPTIONAL) Enter the keyword all to view both active and non-active routes.
static (OPTIONAL) Enter the keyword static to view only routes the ip route command
configures.
summary (OPTIONAL) Enter the keyword summary. For more information, refer to the show ip
route summary command.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
906 IPv4 Routing