Administrator Guide
Version Description
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage Information
If you do not specify parameters and enter service timestamps, it appears as service timestamps debug datetime
in the running-configuration.
To view the current options set for the service timestamps command, use the show running-config
command.
From 9.14.1.5 release, the default timestamp display format for the logs is set to local time (service
timestamps log datetime localtime) instead of service timestamps log datetime.
show alarms
View alarms for the system Core, switching core, port modules, fan trays, and power supplies.
C9000 Series
Syntax
show alarms [pe pe-id | threshold] all
Parameters
pe
pe-id
(OPTIONAL) Enter the keyword pe to display the alarms for port extender (PE). The PE
ID range is from 0 to 255.
threshold (OPTIONAL) Enter the keyword threshold to display the temperature thresholds set
for the line cards, RPM, SFMs, and PE (when configured).
all Enter the keyword all to display all the alarms corresponding to both the controlling
bridge as well as all the PEs checked into it.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.13(0.0) Introduced the keyword all on the C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Control and Monitoring 95