Administrator Guide

show ipv6 interface
Display the status of interfaces configured for IPv6.
C9000 Series
Syntax
show ipv6 interface interface [linecard slot-id] [brief] [configured] [loopback
interface-number] [managementethernet slot/port] [port-channel number]
[tengigabitethernet slot | slot/port] [fortyGigE slot | slot/port] [tunnel
tunnel-id] [vlan vlan-id]
Parameters
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a Loopback interface, enter the keyword Loopback then a number from 0 to
16383.
• For the Null interface, enter the keyword null then zero (0).
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a tunnel interface, enter the keyword tunnel then the tunnel ID.
• For a VLAN interface, enter the keyword VLAN.
• For a port channel interface, enter the keywords port-channel.
• For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the
pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id range is from 1 to 48.
• For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE
then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit
unit-number range is from 0 to 7; and the port-id range is 25 to 28 or
49 to 52 depending on the PE.
linecard slot-id Enter the linecard slot-id parameters to specify the switch ports on a line card.
The range of slot IDs is from 0 to 2.
brief (OPTIONAL) View a summary of IPv6 interfaces.
configured (OPTIONAL) View information on all IPv6 configured interfaces.
managementether
net slot/ port
(OPTIONAL) View information on an IPv6 Management port. Enter the slot number (0-1)
and port number zero (0).
loopback (OPTIONAL) View information for IPv6 Loopback interfaces.
port-channel (OPTIONAL) View information for IPv6 port channels.
tengigabitetherne
t
(OPTIONAL) View information for an IPv6 tengigabitethernet interface.
fortyGigE (OPTIONAL) View information for an IPv6 fortygigabitethernet interface.
tunnel tunnel-id (OPTIONAL) View information for a tunnel interface.
vlan (OPTIONAL) View information for IPv6 VLANs.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
IPv6 Basics 953