Administrator Guide

WARNING: To prevent bodily injury when mounting or servicing this unit in a rack, take special

precautions to ensure that the system remains stable. The following guidelines are provided to

ensure your safety:

• If your chassis is the only unit in the rack, mount it at the bottom of the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with

the heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing

the unit in the rack.

• If the chassis is shipped with blanks, remove the blanks from each RPM, line card, fan module

and PSU slot before lifting the chassis.

1. (Optional) The C9010 chassis is designed to fit into a rack enclosure with the front door closed. If

you plan to use cable management brackets (Installing the Cable Management System ) and close

the front door, re-position and fasten the front rack posts 6.5 inches (165 mm) back towards the rear

of the rack to leave space for the brackets.

2. Determine the height at which you want to mount the chassis in the rack.

Installing the Hardware