Administrator Guide

Example
show ip multicast-cam stack-unit 1 port 0
Vrf Id Group Address Source Address Vlan Id IPMC index L2 Ports L3
Ports
-------- --------------- --------------- ------- ------------ ------------
------------
0 224.1.1.1 0.0.0.0 1000 1 Te 0/3, Te
0/10,
0 224.1.1.2 0.0.0.0 1000 1 Te 0/3, Te
0/10,
0 224.1.1.1 165.13.34.5 2000 2 Te 0/5, Te
0/11,
show ip mroute
View the multicast routing table.
C9000 Series
Syntax
show ip mroute [static | group-address [source-address] | count | snooping
[vlan vlan-id] [group-address [source-address]] | summary | vlt [group-address
[source-address] | count]
Parameters
static (OPTIONAL) Enter the keyword static to view static multicast routes.
group-address
[ source-address ]
(OPTIONAL) Enter the multicast group-address to view only routes associated with that
group. Enter the source-address to view routes with that group-address and source-
address.
count (OPTIONAL) Enter the keyword count to view the number of multicast routes and
packets.
snooping [vlan
vlan-id ] [ group-
address [ source-
address ]]
Enter the keyword snooping to display information on the multicast routes PIM-SM
snooping discovers.
Enter a VLAN ID to limit the information displayed to the multicast routes PIM-SM
snooping discovers on a specified VLAN. The VLAN ID range is from 1 to 4094.
Enter a multicast group address and, optionally, a source multicast address in dotted
decimal format (A.B.C.D) to limit the information displayed to the multicast routes PIM-
SM snooping discovers for a specified multicast group and source.
summary (OPTIONAL) Enter the keyword summary to view a summary of all routes.
vlt (OPTIONAL) Enter the keyword vlt to view multicast routes with a spanned incoming
interface. Enter a multicast group address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified multicast group and optionally
a source multicast address in dotted decimal format (A.B.C.D) to limit the information
displayed for a specified multicast source. Enter the keyword count to display the total
number of multicast routes with the spanned IIF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.) Introduced on the C9010.
9.0.2.0 Introduced on the S6000.
9.2.(0.0) Added support for keyword vlt to the Z9000, S4810, and S4820T.
8.4.1.1 Support for the keyword snooping and the optional vlan vlan-id, group-
address, and source-address parameters were added on E-Series ExaScale.
1036 Multicast