Administrator Guide

group-address
[ source-address ]
(OPTIONAL) Enter the multicast group-address to view only routes associated with that
group. Enter the source-address to view routes with that group-address and source-
address.
count (OPTIONAL) Enter the keyword count to view the number of multicast routes and
packets.
summary (OPTIONAL) Enter the keyword summary to view a summary of all routes.
vlt (OPTIONAL) Enter the keyword vlt to view multicast routes with a spanned incoming
interface. Enter a multicast group address in dotted decimal format (A.B.C.D) to limit the
information displayed to the multicast routes for a specified multicast group and optionally
a source multicast address in dotted decimal format (A.B.C.D) to limit the information
displayed for a specified multicast source. Enter the keyword count to display the total
number of multicast routes with the spanned IIF.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
9.11.3.0 Introduced on the C9000, S3048–ON, S3100, S4048–ON, S4048T-ON, S6000–ON,
S6010–ON, S6100–ON and Z9100–ON.
Example
Dell# show ipv6 mroute
IP Multicast Routing Table
(*, ff0e:225:0:1::1), uptime 18:01:56
Incoming interface: Null
Outgoing interface list:
Vlan 401
Vlan 1001
(2001:120:3:1::11, ff0e:225:0:1::1), uptime 18:02:03
Incoming interface: Vlan 401
Outgoing interface list:
Vlan 1001
(2001:130:3:1::11, ff0e:225:0:1::1), uptime 18:01:17
Incoming interface: Vlan 1001
Outgoing interface list:
Vlan 401
(2001:140:3:1::11, ff0e:225:0:1::1), uptime 18:01:13
Incoming interface: Vlan 1001
Outgoing interface list:
Vlan 401
Dell#
show ipv6 multicast-cam
Display the content addressable memory (CAM) size and the portions allocated for IP multicast traffic.
Syntax
show ipv6 multicast-cam [linecard slot-id | port-set port-pipe | stack-unit
unit-id]
Parameters
linecard slot-id Enter the keyword linecard with a slot id to select the line card for which to gather
information. The range of slot IDs is from 0 to 2.
port-set port-pipe Enter the keyword port-set with a port-pipe number to select the port pipe for which
to gather information. The range of port pipes is from 0 to 3.
1040 Multicast