Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1111

metric

metric-

value

(OPTIONAL) Enter the keyword metric then a number to configure a metric value for

the route. The range is from 1 to 16777214.

metric-type

type-

value

(OPTIONAL) Enter the keywords metric-type then an OSPF link state type of 1 or 2

for default routes. The values are:

• 1 = Type 1 external route

• 2 = Type 2 external route

route-map

map-

name

(OPTIONAL) Enter the keywords route-map then the name of an established route

map.

Defaults Disabled.

Command Modes ROUTER OSPF

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added support for the Multi-Process OSPF.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.1.1.1 Introduced on the E-Series.

Commands

redistribute — redistributes routes from other routing protocols into OSPF.

default-metric

Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the redistribute command.

C9000 Series

Syntax

default-metric number

To return to the default values, use the no default-metric [number] command.

Parameters

number

Enter a number as the metric. The range is from 1 to 16777214.