Administrator Guide

cardAlive = 0 pStatusMask = 0xffffffff
ppStatus[0] = 0x00000001 ppStatus[1] = 0x00000001
Dell# show software ifm linecard 0 | save flash://sh_sf_ifm_linecard0
Start saving show command report .......
show system linecard
Display the status of a specified linecard.
Syntax
show system linecard slot-id fanout {configured | count}
Parameters
slot-id Enter the linecard slot-id. The slot-id range is from 0 to 11.
count Enter the keyword count to view the fanout ports configured or present on a linecard.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell#sh system linecard 6 fanout configured
Configured fan out ports in linecard 6
Configured Present
0 0
4 4
8 8
12 12
16 16
20 20
Dell#sh system linecard 6 fanout count
Fan out ports in linecard 6
Configured = 6
Present = 6
show tech-support
Display a collection of data from other show commands, necessary for Dell Networking technical support to troubleshoot switch
operation.
C9000 Series
Syntax
show tech-support [linecard slot-id | page | pe pe-id stack-unit unit-number]
From a PE console, use show tech-support stack-unit unit-number page
Parameters
linecard slot-id Enter the slot ID of the line card for which you want to collect information for tech
support. The range of slot IDs is from 0 to 11. Enter linecard all to collect
troubleshooting information on all line cards.
page (OPTIONAL) Enter the keyword page to view 24 lines of text at a time. Press the
SPACE BAR to view the next 24 lines. Press the ENTER key to view the next line of text.
Control and Monitoring 135