Administrator Guide

Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Example
Dell#show qos class-map
Class-map match-any CM
Match ip access-group ACL
Related
Commands
class-map — identifies the class map.
show qos policy-map
View the QoS policy map information.
C9000 Series
Syntax
show qos policy-map {summary [interface] | detail [interface]}
Parameters
summary
interface
To view a policy map interface summary, enter the keyword summary and optionally one
of the following keywords and slot/port or number information:
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE then
the
pe-id / stack-unit / port-id information.
For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE
then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;
the stack-unit unit-number range is from 0 to 7; and the port-id range is 25 to 28 or
49 to 52 depending on the PE.
detail
interface
To view a policy map interface in detail, enter the keyword detail and optionally one of
the following keywords and slot/port or number information:
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
For a port extender (PE) Gigabit Ethernet interface, enter the keyword peGigE then
the
pe-id / stack-unit / port-id information.
1380 Quality of Service (QoS)