Administrator Guide

route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of a configured route-map.
Defaults Disabled. Metric: 1.
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Usage Information The default route must be present in the switch routing table for the default-information originate
command to take effect.
default-metric
Change the default metric for routes. To ensure that all redistributed routes use the same metric value, use this command with the
redistribute command.
C9000 Series
Syntax
default-metric number
To return the default metric to the original values, use the no default-metric command.
Parameters
number Specify a number. The range is from 1 to 16. The default is 1.
Defaults 1
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
Routing Information Protocol (RIP) 1423