Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

1451

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the E-Series.

Usage Information By default, the aaa authorization commands command configures the system to check both EXEC level

and CONFIGURATION level commands. Use the command no aaa authorization config-commands to

enable only EXEC-level command checking.

aaa authorization exec

Set parameters that restrict (or permit) a user’s access to EXEC-level commands.

C9000 Series

Syntax

aaa authorization exec {name | default} {local || tacacs+ || if-authenticated

|| none}

To disable authorization checking for EXEC level commands, use the no aaa authorization exec

command.

Parameters

name

Define a name for the list of authorization methods.

default Define the default list of authorization methods.

local Use the authorization parameters on the system to perform authorization.

tacacs+ Use the TACACS+ protocol to perform authorization.

none Enter the keyword none to apply no authorization.

Defaults none