Administrator Guide

Version Description
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000, S6010–
ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and MXL.
replay-protection-window
Configure replay protection window period to drop the duplicate packets.
Syntax
replay-protection-window minutes
To undo the configuration, enter the no replay-protection-window command.
Defaults 5 Minutes.
Parameters
minutes Enter the number of minutes to drop the packets. The range is from 1 to 10 minutes.
Command Modes
• CONF-DYNAMIC-AUTH
Usage Information
• Duplicate packets are dropped within replay-protection-window period if packet has same source IP address,
source UDP port and identifier.
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000, S6010–
ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and MXL.
terminate-session
Configure NAS to reject dot1x terminate-session requests from DAC.
Syntax
terminate-session
To drop the DM terminate-session requests from DAC, enter the no terminate-session command.
Defaults Enabled.
Command Modes
• CONF-DYNAMIC-AUTH
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000, S6010–
ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and MXL.
Security 1481