Administrator Guide

IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2.
This is a
port connected to Router2. This is a port connected to Router2. This is a
port
connected to Router2. This is a port connected to Router2.
IF-MIB::ifAlias.134792448 = STRING:
snmp mib community-map
Associate an SNMP community context (string) with an SNMP context community-map
C9000 Series
Syntax
snmp mib community-map name context name
Defaults Community name is limited to 20 characters.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Example
Dell(conf)#snmp mib ?
community-map Map a SNMP community String with a SNMP context
Dell(conf)#snmp mib community-map ?
WORD Name of the Community(Max 20 chars)
Dell(conf)#snmp mib community-map rise1 ?
context Snmp Context
Dell(conf)#snmp mib community-map rise1 context ?
WORD SNMP Context Name(Max 32 chars)
snmp-server contact
Configure contact information for troubleshooting this SNMP node.
C9000 Series
Syntax
snmp-server contact text
To delete the SNMP server contact information, use the no snmp-server contact command.
Parameters
text Enter an alphanumeric text string, up to 55 characters long.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Simple Network Management Protocol (SNMP) and Syslog 1551