Administrator Guide

proxy-gateway static
Enable the proxy-gateway feature using static configurations.
C9000 Series
Syntax
[no] proxy-gateway static
Command Modes VLT DOMAIN
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage Information
When proxy-gateway static configuration is added, the setting is saved in the Layer 2 module. When you remove
the static proxy gateway configuration, each proxy-gateway static mac configured is deleted from the
Layer 2 module.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
remote-mac-address exclude-vlan
Configure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
C9000 Series
Syntax
[no] remote-mac-address mac—address [exclude-vlan vlan-range]
Parameters
remote-mac-
address
Specify the mac-addresses of the VLT peers which are in the remote VLT Domain.
mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn format.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are excluded
from doing proxy gateway. The value can be a single VLAN ID or comma -separated,
VLAN IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.1) Introduced on the S3048-ON.
9.7(0.1) Introduced on the S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can configure the MAC address, of a VLT peer in remote VLT Domain, to be associated with the static VLT
proxy gateway and exclude a VLAN or a range of VLANs from proxy routing..
Virtual Link Trunking (VLT) 1687