Administrator Guide

vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of the VRF to clear counters
that are maintained on the VRRP operations corresponding to that VRF.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Added support for VRF.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Example
Dell#clear counters vrrp vrf indus
Clear "show vrrp" counters of all vrrp groups on all interfaces in VRF indus
[confirm] yes
debug vrrp
Enable debugging of VRRP.
C9000 Series
Syntax
debug vrrp interface [vrrp-id] {all | bfd | database | interface | ipv6 |
packets | state | timer}
To disable debugging, use the no debug vrrp interface [vrrp-id] {all | bfd | database |
interface | ipv6 | packets | state | timer} command.
Parameters
interface Enter the following keywords and slot/port or number information
• For Port Channel interface types, enter the keywords port-channel then the
number. The range is from 1 to 128.
• For a 40-Gigabit Ethernet interface, enter the keyword FortyGigabitEthernet
then the slot/port information.
•
For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port information.
• For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID range
is from 1 to 4094.
vrrp-id (OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all Enter the keyword all to enable debugging of all VRRP groups.
1692 Virtual Router Redundancy Protocol (VRRP)