Administrator Guide

Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
Dell#show ip vrf
VRF-Name VRF-ID Interfaces
default 0 Te 0/0-13,18-47,
Fo 0/48,52,56,60,
Ma 0/0,
Ma 1/0,
Ma 2/0,
Ma 3/0,
Ma 4/0,
Ma 5/0,
Ma 6/0,
Ma 7/0,
Ma 8/0,
Ma 9/0,
Ma 10/0,
Ma 11/0,
Nu 0,
Vl 1
test1 1 Te 0/14,16-17
test2 2 Te 0/15
management 64
Dell#show ip vrf test1
VRF-Name VRF-ID Interfaces
test1 1 Te 0/14,16-17
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
C9000 Series
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF..
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
1718 Virtual Routing and Forwarding (VRF)