Administrator Guide

show file
Display contents of a text file in the local filesystem.
C9000 Series
Syntax
show file filesystem
From a PE console, use show file filesystem to view the contents of a text file.
Parameters
filesystem Enter one of the following:
• For internal flash, enter flash:
• For USB flash, enter usbflash:
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series
E-Series Original command
Example
Dell#show file flash://startup-config
! Version 1-0(0-4079)
! Last configuration change at Wed Jun 24 02:02:40 2015 by default
! Startup-config last updated at Wed Jun 24 02:02:44 2015 by default
!
boot system rpm0 primary tftp://10.11.227.233/pt-c9000-2
boot system rpm0 secondary system: A:
boot system rpm0 default system: A:
boot system rpm1 primary tftp://10.11.227.233/pt-c9000-2
boot system rpm1 secondary system: A:
boot system rpm1 default system: A:
!
service timestamps log datetime
!
logging coredump
!
hostname Dell
!
protocol lldp
!
feature extended-bridge
!
redundancy auto-failover-limit count 3 period 60
redundancy auto-synchronize full
!
redundancy disable-auto-reboot pe all
!
enable password 7 b125455cf679b208e79b910e85789edf
!
176
File Management