Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

341

342

343

344

345

346

347

348

349

350

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048–ON and S4048–ON.

9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

Usage Information

To remove all configured debug commands for BGP, enter the no debug ip bgp command.

debug ip bgp notifications

View information about BGP notifications received from neighbors.

C9000 Series

Syntax

debug ip bgp [vrf vrf-name] [A.B.C.D | X:X:X:X::X | peer-group peer-group-name]

notifications [in | out]

To disable debugging, use the no debug ip bgp [vrf vrf-name] [A.B.C.D | X:X:X:X::X |

peer-group peer-group-name] notifications [in | out] command.

Parameters

vrf

vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to view neighbor

BGP notification information corresponding to that VRF.

A.B.C.D

(OPTIONAL) Enter the IPv4 address of the neighbor.

X:X:X:X::X

(OPTIONAL) Enter an IPv6 address.

peer-group

peer-

group-name

(OPTIONAL) Enter the keyword peer-group then the name of the peer group.

in (OPTIONAL) Enter the keyword in to view BGP notifications received from neighbors.

out (OPTIONAL) Enter the keyword out to view BGP notifications sent to neighbors

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.