Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

351

352

353

354

355

356

357

358

359

360

out Enter the keyword out to filter outbound BGP routes.

Defaults Not configured.

Command Modes

• ROUTER BGP

• ROUTER BGP-address-family

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.11.1 Introduced on the Z9000.

7.8.1.0 Introduced on the S-Series.

Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, ACL names

were up to 16 characters long.

7.7.1.0 Introduced on the C-Series.

Usage Information To enter AS-PATH ACL mode and configure the AS-PATH filters to deny or permit BGP routes based on

information in their AS-PATH attribute, use the ip as-path access-list command in CONFIGURATION

mode.

Commands

ip as-path access-list — enter AS-PATH ACL mode and configure the AS-PATH filters.

neighbor local-as

To accept external routes from neighbors with a local AS number in the AS number path, configure Internal BGP (IBGP) routers.

C9000 Series

Syntax

neighbor {ip-address | peer-group-name} local-as as-number [no-prepend]

To return to the default value, use the no neighbor {ip-address | peer-group-name} local-as

command.

Parameters

ip-address

Enter the IP address of the neighbor in dotted decimal format.

peer-group-name

Enter the name of the peer group to set the advertisement interval for all routers in the

peer group.

as-number

Enter the AS number to reset all neighbors belonging to that AS. The range is from 0 to

65535 (2 byte), from 1 to 4294967295 (4 byte) or from 0.1 to 65535.65535 (dotted

format).

no prepend Specifies that local AS values do not prepend to announcements from the neighbor.