Administrator Guide

Version Description
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
show ip bgp ipv6 unicast neighbors
Allows you to view the information exchanged by BGP neighbors.
C9000 Series
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length | ip-address]
[advertised-routes | dampened-routes | detail | flap-statistics | routes]
Parameters
ipv6-address
prefix-length | ip-
address
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in the /x
format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros or
enter an IP address in dotted decimal format to reset all prefixes from that
neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view only the routes the
neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on dampened
routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal information
for the IPv6 address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on the
neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Related
Commands
show ip bgp – view the current BGP routing table.
show ip bgp ipv6 unicast peer-group
Allows you to view information on the BGP peers in a peer group.
C9000 Series
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name (OPTIONAL) Enter the name of a peer group to view information about that peer group
only.
474 Border Gateway Protocol