Administrator Guide

Field Description
Interface Interface type with stack-unit and port number.
Admin mode is on
Admin is enabled
PFC admin mode is on or off with a list of the configured PFC priorities. When the PFC
admin mode is on, PFC advertisements are enabled to be sent and received from peers;
received PFC configuration take effect. The admin operational status for a DCBX
exchange of PFC configuration is enabled or disabled.
Remote is
enabled, Priority
list Remote Willing
Status is enabled
Operational status (enabled or disabled) of peer device for DCBX exchange of PFC
configuration with a list of the configured PFC priorities. Willing status of peer device for
DCBX exchange (Willing bit received in PFC TLV): enabled or disable.
Local is enabled DCBX operational status (enabled or disabled) with a list of the configured PFC priorities.
Operational status
(local port)
Port state for current operational PFC configuration:
• Init: Local PFC configuration parameters were exchanged with the peer.
• Recommend: Remote PFC configuration parameters were received from the peer.
• Internally propagated: PFC configuration parameters were received from the
configuration source.
PFC DCBX Oper
status
Operational status for the exchange of the PFC configuration on the local port: match
(up) or mismatch (down).
State Machine
Type
Type of state machine used for DCBX exchanges of the PFC parameters: Feature — for
legacy DCBX versions; Symmetric — for an IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application
Priority TLV:
FCOE TLV Tx
Status
Status of FCoE advertisements in application priority TLVs from the local DCBX port:
enabled or disabled.
Application
Priority TLV: SCSI
TLV Tx Status
Status of ISCSI advertisements in application priority TLVs from the local DCBX port:
enabled or disabled.
Application
Priority TLV: Local
FCOE Priority Map
Priority bitmap the local DCBX port uses in FCoE advertisements in application priority
TLVs.
Application
Priority TLV: Local
ISCSI Priority Map
Priority bitmap the local DCBX port uses in ISCSI advertisements in application priority
TLVs.
Application
Priority TLV:
Remote FCOE
Priority Map
Status of FCoE advertisements in application priority TLVs from the remote peer port:
enabled or disabled.
Application
Priority TLV:
Remote ISCSI
Priority Map
Status of iSCSI advertisements in application priority TLVs from the remote peer port:
enabled or disabled.
PFC TLV
Statistics: Input
TLV pkts
Number of PFC TLVs received.
PFC TLV
Statistics: Output
TLV pkts
Number of PFC TLVs transmitted.
PFC TLV
Statistics: Error
pkts
Number of PFC error packets received.
Data Center Bridging (DCB) 513