Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010 and C1048P.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced the verbose option.
7.7.1.0 Introduced on the S-Series.
Related
Commands
offline system— bring a switch offline to run diagnostic tests.
offline linecard
Place the linecard in the offline state in order to run the diagnostics tests.
C9000 Series
Syntax
offline linecard
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command-Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information
A warning message appears when the offline linecard command is implemented.
Warning - offline of linecard will bring down all the protocols and
the linecard will be operationally down, except for running Diagnostics.
The "reload or reset" command is required for normal operation after the
offline command is issued.
Proceed with Offline [confirm yes/no]:
To bring the linecard back to online state, reset the linecard using the reset linecard slot-id command.
Related
Commands
diag — run diagnostic tests on an offline switch.
offline system
Place the switch in the offline state in order to run diagnostic tests.
C9000 Series
Syntax
offline system
Defaults none
Command Modes EXEC Privilege
Debugging and Diagnostics 553