Administrator Guide

rpm1 Enter the keyword rpm1 to set the RPM in slot R1 as the primary RPM.
Default The RPM in slot R0 is the Primary RPM.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
redundancy reset-counter
Reset failover counter and timestamp information displayed in the show redundancy command output.
C9000 Series
Syntax
redundancy reset-counter pe pe-id
Parameters
pe pe-id Enter the keyword pe and the port extender ID to reset the counter. Range is from 0 to
255.
Default Not configured.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the E-Series.
Example
Dell#redundancy reset-counter pe 1
High Availability (HA) 673