Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

681

682

683

684

685

686

687

688

689

690

clear dampening

Clear the dampening counters on all the interfaces or just the specified interface.

C9000 Series

Syntax

clear dampening [interface]

Parameters

interface

(OPTIONAL) Enter any of the following keywords and slot/port or number to clear

counters from a specified interface:

• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet then the

slot/port information.

• For a Port Channel interface, enter the keywords port-channel then a number.

The range is from 1 to 128.

• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then

the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/

port information.

• For a port extender Gigabit Ethernet interface, enter the keyword peGigE then the

pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255; the stack-

unit unit-number range is from 0 to 7; and the port-id range is from 0 to 47.

• For a port extender 10-Gigabit Ethernet interface, enter the keyword peTenGigE

then the pe-id / stack-unit / port-id information. The pe-id range is from 0 to 255;

the stack-unit

unit-number range is from 0 to 7; and the port-id range is 25 to 28

or 49 to 52 depending on the PE.

Defaults Without an interface specified, the command clears all interface dampening counters.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking

OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.13.0.1P1 Introduced peTenGigE interface support on the C9010.

9.9(0.0) Introduced on the C9010.

9.2(1.0) Introduced on the Z9500.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.5.1.0 Added support for 4-port 40G line cards on ExaScale.

8.3.7.0 Introduced on the S4810.

8.1.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

Example

Dell# clear dampening tengigabitethernet 1/2

Clear dampening counters on Te 1/2 [confirm] y

Dell#

Commands

• show interfaces dampening — displays interface dampening information.

• dampening — configures dampening on an interface.

Interfaces 683