Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsC9010 Modular Chassis Switch

771

772

773

774

775

776

777

778

779

780

Parameters

vrf

vrf-name

(Optional) Enter the keyword vrf followed by the name of the VRF to restart the IS-IS

process corresponding to that VRF.

tag

(Optional) Enter an alphanumeric string to specify the IS-IS routing tag area.

* Enter the keyword * to clear all IS-IS information and restart the IS-IS process. This

command removes IS-IS neighbor information and IS-IS LSP database information and

the full SPF calculation is done.

database Clears IS-IS LSP database information.

traffic Clears IS-IS counters.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.9(0.0) Introduced on the C9010.

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Added support for VRF. Introduced on the S6000–ON.

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

clns host

Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.

C9000 Series

Syntax

clns host name nsap

Parameters

name

Enter an alphanumeric string to identify the name-to-NSAP mapping.

nsap

Enter a specific NSAP address that is associated with the name parameter.

Defaults Not configured.

Command Modes ROUTER ISIS