Administrator Guide

========|========|=================|=============|=============|
==============
1 | 0 | IN-L2 ACL | 1008 | 320 | 688
| | IN-L2 FIB | 32768 | 1132 | 31636
| | IN-L3 ACL | 12288 | 2 | 12286
| | IN-L3 ECMP GRP | 1024 | 0 | 1024
| | IN-L3 FIB | 262141 | 14 | 262127
| | IN-L3-SysFlow | 2878 | 45 | 2833
| | IN-L3-TrcList | 1024 | 0 | 1024
| | IN-L3-McastFib | 9215 | 0 | 9215
| | IN-L3-Qos | 8192 | 0 | 8192
| | IN-L3-PBR | 1024 | 0 | 1024
| | IN-V6 ACL | 0 | 0 | 0
| | IN-V6 FIB | 0 | 0 | 0
| | IN-V6-SysFlow | 0 | 0 | 0
| | IN-V6-McastFib | 0 | 0 | 0
| | OUT-L2 ACL | 1024 | 0 | 1024
| | OUT-L3 ACL | 1024 | 0 | 1024
| | OUT-V6 ACL | 0 | 0 | 0
1 | 1 | IN-L2 ACL | 320 | 0 | 320
| | IN-L2 FIB | 32768 | 1136 | 31632
| | IN-L3 ACL | 12288 | 2 | 12286
| | IN-L3 FIB | 262141 | 14 | 262127
| | IN-L3-SysFlow | 2878 | 44 | 2834
--More--
Example 2: Output
of the show cam-
usage acl
Command
Dell#show cam-usage acl
Stackunit|Portpipe| CAM Partition | Total CAM | Used CAM |Available
CAM
========|========|=================|=============|=============|============
11 | 0 | IN-L2 ACL | 1008 | 0 |
1008
| | IN-L3 ACL | 12288 | 2 |
12286
| | OUT-L2 ACL | 1024 | 2 |
1022
| | OUT-L3 ACL | 1024 | 0 | 1024
| | IN-L3 ECMP GRP | 1024 | 0 | 1024
Example 3: Output
of the show cam-
usage router
Command
Example 4: Output
of the show cam-
usage switch
Command
show ipv6 access-list
Display IPv6 access-list information.
C9000 Series
Syntax
show ipv6 access-list { [name] | interface } { in | out | interface }
Parameters
access-list Enter the keywords access-list to display information for all ipv6 access-lists.
acl_name Enter the keywords acl_name to display information for a specified ipv6 access-list.
in Enter the keyword in to display information for an ipv6 ingress access-list attached to an
interface.
930 IPv6 Access Control Lists (IPv6 ACLs)