Administrator Guide

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Example
Dell#show ipv6 fib linecard 10
Prefix Next-Hop Mac-Addr Port VId EC
-------------------------------------------------------------------------
::/0 - 00:00:00:00:00:00 CP 0 0
2::/64 ::, Te 10/1 00:00:00:00:00:00 CP 0 0
2::3/128 ::1 00:00:00:00:00:00 CP 0 0
fe80::/10 ::, Nu 0 00:00:00:00:00:00 BLK HOLE 0 0
fe80::2ff:eff:fe3f:a1/128 ::1 00:00:00:00:00:00 CP 0 0
show ipv6 flowlabel-zero
Display the flow label zero setting.
C9000 Series
Syntax
show ipv6 flowlabel-zero
Default Disabled
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 nd dad attempts — Configure system to set the flow label field in the packets to zero.
952 IPv6 Basics