Administrator Guide

Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit — displays details of the mac learning-limit.
mac learning-limit mac-address-sticky
Maintain the dynamically learned mac addresses as sticky MAC addresses on the selected port.
C9000 Series
Syntax
mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac learning-limit
command.
Parameters
mac-address-
sticky
Configures the dynamic MAC addresses as sticky on an interface.
Defaults none
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
Usage Information If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically learned MAC addresses
are converted to sticky for that port. Any new MAC address that is learned also becomes sticky for that port.
Related
Commands
show mac learning-limit — displays the details of the mac learning-limit.
Layer 2 975